Tyler Irving

��οexperts use machine learning to analyze where bike lanes should be located for maximum benefit

Christopher.Sorensen — Wed, 23 Oct 2024 14:07:11 +0000

��οexperts use machine learning to analyze where bike lanes should be located for maximum benefit

Christopher.Sorensen Wed, 10/23/2024 - 10:07

Cutline

Researchers from U of T's Faculty of Applied Science & Engineering used novel computing approaches to compare utilitarian and equity-driven approaches toward expansion of protected bike lanes (photo by Michelle Mengsu Chang/Toronto Star via Getty Images)

Tyler Irving

Topic

Breaking Research

department of mechanical and industrial engineering

Artificial Intelligence

Cities

Faculty of Applied Science & Engineering

Sustainability

Subheadline

“If you optimize for equity, you get a map that is more spread out and less concentrated in the downtown areas"

A team of researchers from the department of civil and mineral engineering in the University of Toronto’s Faculty of Applied Science & Engineering are wielding machine learning to understand where cycling infrastructure should be located in order to benefit the most people.

In a paper published in the Journal of Transport Geography, researchers used novel computing approaches to compare two strategies for expansion of protected bike lanes – using Toronto as a model.

“Right now, some people have really good access to protected biking infrastructure: they can bike to work, to the grocery store or to entertainment venues,” says post-doctoral fellow and lead author Madeleine Bonsma-Fisher, who previously researched interactions between bacteria and viruses before applying her data analysis skills to active transportation. “More lanes could increase the number of destinations they can reach, and previous work shows that will increase the number of cycle trips taken.

“However, many people have little or no access to protected cycling infrastructure at all, limiting their ability to get around. This raises a question: is it better to maximize the number of connected destinations and potential trips overall, or is it more important to focus on maximizing the number of people who can benefit from access to the network?”

To delve into the question, Bonsma-Fisher and co-authors used machine learning and optimization, a challenge that required them to explore new computational approaches.

“This kind of optimization problem is what’s called an ‘NP-hard’ problem, which means that the computing power needed to solve it scales very quickly along with the size of the network,” says Shoshanna Saxe¸ associate professor in the department of civil and mineral engineering and one of Bonsma-Fisher’s two co-supervisors alongside Professor Timothy Chan of the department of mechanical and industrial engineering. “If you used a traditional optimization algorithm on a city the size of Toronto, everything would just crash.”

To get around the problem, PhD student Bo Lin invented a machine learning model capable of considering millions of combinations of over a thousand different infrastructure projects in order to test where the most impactful places are to build new cycling infrastructure.

Using Toronto as a stand-in for any large, automobile-oriented North American city, the team generated maps of future bike lane networks along major streets, optimized according to two broad types of strategies.

The first strategy, dubbed the utilitarian approach, focused on maximizing the number of trips that could be taken using only routes with protected bike lanes in under 30 minutes – without regard for who those trips were taken by.

The second, an equity-based strategy, sought to maximize the number of people who had at least some connection to the network.

“If you optimize for equity, you get a map that is more spread out and less concentrated in the downtown areas,” says Bonsma-Fisher. “You do get more parts of the city that have a minimum of accessibility by bike, but you also get a somewhat smaller overall gain in average accessibility.”

This results in a trade-off, says Saxe. “This trade-off is temporary, assuming we will eventually have a full cycling network across the city, but it is meaningful for how we do things in the meantime and could last a long time given ongoing challenges to building cycling infrastructure.”

Another key finding was that certain routes appeared to be essential no matter what strategy was pursued – for example, protected bike lanes along Bloor Street West.

“Those bike lanes benefit even people who don’t live near them and are a critical trunk to maximizing both the equity and utility of the bike network. Their impact is so consistent across models that it challenges the idea that bike lanes are a local issue, affecting only the people close by,” Saxe says. “Optimized infrastructure repeatedly turns out in our model to serve neighbourhoods quite a distance away.”

The team is already sharing their data with Toronto’s city planners to help inform ongoing decisions about infrastructure investments. Going forward, the researchers hope to apply their analysis to other cities as well.

“No matter what your local issues or what choices you end up making, it’s really important to have a clear understanding of what goals you are aiming for and check if you are meeting them,” says Bonsma-Fisher.

“This kind of analysis can provide an evidence-based, data-driven approach to answering these tough questions.”

Large-scale adoption of electric vehicles can lead to human health benefits: Study

Christopher.Sorensen — Mon, 21 Oct 2024 14:05:14 +0000

Large-scale adoption of electric vehicles can lead to human health benefits: Study

Christopher.Sorensen Mon, 10/21/2024 - 10:05

Cutline

Researchers from U of T's Faculty of Applied Science & Engineering used computer models to simulate the impact of large-scale adoption of electric vehicles in the U.S. (photo by: Plexi Images/Glasshouse Images/UCG/Universal Images Group via Getty Images)

Tyler Irving

Topic

Breaking Research

Faculty of Applied Science & Engineering

Research & Innovation

Sustainability

Subheadline

"Our simulation shows that the cumulative public health benefits of large-scale EV adoption between now and 2050 could run into the hundreds of billions of dollars"

Large-scale adoption of electric vehicles (EVs) could lead to significant health benefits for populations, according to a new study from the department of civil and mineral engineering in the University of Toronto’s Faculty of Applied Science & Engineering.

Researchers used computer simulations to show that aggressive electrification of the U.S. vehicle fleet, coupled with an ambitious roll-out of renewable electricity generation, could result in health benefits worth between US$84 billion and 188 billion by 2050.

Even scenarios with less aggressive grid decarbonization mostly predicted health benefits running into the tens of billions of dollars.

“When researchers examine the impacts of EVs, they typically focus on climate change in the form of mitigating CO2 emissions,” says Professor Marianne Hatzopoulou, one of the co-authors of the study, which was published in PNAS.

“But CO2 is not the only thing that comes out of the tailpipe of an internal combustion vehicle. They produce many air pollutants that have a significant, quantifiable impact on public health. Furthermore, evidence shows that those impacts are disproportionately felt by populations that are low-income, racialized or marginalized.”

The research team previously used their expertise in life-cycle assessment to build computer models that simulated the impact of large-scale EV adoption in the U.S. market.

Among other things, they showed that while EV adoption will have a positive impact on climate change, it is not sufficient on its own to meet the Paris Agreement targets. They recommended that EV adoption be used in combination with other strategies, such as investments in public transit, active transportation and higher housing density.

In their latest study, the team sought to account for the non-climate benefits of EV adoption. They adapted their models to simulate the production of air pollutants that are common in fossil fuel combustion, such as nitrogen oxides, sulphur oxides and small particles known as PM2.5.

“Modelling these pollutants is very different from modelling CO2, which lasts for decades and ends up well-mixed throughout the atmosphere,” says study co-author Daniel Posen, an associate professor in the department of civil and mineral engineering.

“In contrast, these pollutants, and their associated health impacts, are more localized. It matters not only how much we are emitting, but also where we emit them.”

While EVs do not produce tailpipe emissions, they can still be responsible for air pollution if the power plants that supply them run on fossil fuels. This also has the effect of displacing air pollution from busy highways to the communities that live near those power plants.

Another complication is that neither the air pollution from the power grid nor that from internal combustion vehicles is expected to stay constant over time.

“Today’s gasoline-powered cars produce a lot less pollution than those that were built 20 years ago, many of which are still on the road,” says Jean Schmitt, post-doctoral fellow and lead author of the study.

“So, if we want to fairly compare EVs to internal combustion vehicles, we have to account for the fact that air pollution will still go down as these older vehicles get replaced. We can also see that the power grid is getting greener over time, as more renewable generation gets installed.”

The team, which also included Professor Heather MacLean of the department of civil and mineral engineering and Amir F. N. Abdul-Manan of Saudi Aramco’s Strategic Transport Analysis Team, chose two primary scenarios to simulate to the year 2050. In the first, they assumed that no more EVs will be built, but that older internal combustion vehicles will continue to be replaced with newer, more efficient ones.

In the second scenario, they assumed that by 2035, all new vehicles sold will be electric. The researchers described this as “aggressive,” but it is in line with the stated intentions of many countries. For example, Norway plans to eliminate sales of non-electric vehicles next year, and Canada plans to follow suit by 2035.

For each of these scenarios, they also considered various rates for the transition of the electric grid to low-emitting and renewable energy sources.

Under each set of conditions, the team simulated air pollution levels across the U.S. and used calculations commonly used by epidemiologists, actuaries and policy analysts to correlate pollution levels with statistical estimates of the number of years of life lost, as well as with estimates of economic value.

“Our simulation shows that the cumulative public health benefits of large-scale EV adoption between now and 2050 could run into the hundreds of billions of dollars,” says Posen.

“That’s significant, but another thing we found is that we only get these benefits if the grid continues to get greener. We are already transitioning away from fossil fuel power generation, and it’s likely to continue in the future. But for the sake of argument, we modelled what would happen if we artificially freeze the grid in its current state.

“In that case, we’d actually be better off simply replacing our old internal combustion vehicles with new ones – but again, this is not a very realistic scenario.”

This finding raises the question of whether it’s more important to decarbonize the transportation sector through EV adoption, or to first decarbonize the power generation sector that’s the ultimate source of pollution associated with EVs.

To that, Hatzopoulou notes that vehicles sold today will continue to be used for decades. “If we buy more internal combustion vehicles now, however efficient they may be, we will be locking ourselves into those tailpipe emissions for years to come, and they will spread that pollution everywhere there are roads,” she says. “We still need to decarbonize the power generation system – and we are – but we should not wait until that process is complete to get more EVs on the road.

“We need to start on the path to a healthier future today.”

3D-printed soil? ��οstartup expands sustainable urban farming footprint in Toronto

Christopher.Sorensen — Wed, 11 Sep 2024 15:07:18 +0000

3D-printed soil? ��οstartup expands sustainable urban farming footprint in Toronto

Christopher.Sorensen Wed, 09/11/2024 - 11:07

Cutline

Leo Hua and Adnan Sharif show off fresh basil that was grown with Lyrata’s sustainable farming system at Toronto’s Casa Loma (photo by Liz Intac)

Topic

Entrepreneurship Hatchery

Faculty of Applied Science & Engineering

Innovation & Entrepreneurship

Startups

Sustainability

��οScarborough

Subheadline

With new installations at Casa Loma and ��οScarborough, Lyrata is supplying freshly grown produce to local caterers and restaurants

A startup co-founded by a University of Toronto graduate student has its roots in an experience that is all too common for many of us.

He kept forgetting to water his plants.

“I was working in a plant immunity biology lab, so if I didn’t water them, I’d have no plants to do experiments with,” says Adnan Sharif, who is pursuing a master’s degree in the department of chemical engineering and applied chemistry in the Faculty of Applied Science & Engineering.

He says his solution was inspired by his father.

“My dad is a mechanical engineering professor at a university in Japan, and he knows a lot about manufacturing materials with porous, three-dimensional structures,” he says. “That’s how I got the idea to make my own 3D-printed soil construct, which could retain water for a week or more.

“That way, I wouldn’t have to go into the lab and water the plants so often.”

The innovation – which Sharif came up as an undergraduate working in the lab of Keiko Yoshioka, a professor in the department of cell and systems biology in U of T’s Faculty of Arts & Science – is one of several that now underpins Lyrata, a startup that grows fresh produce for caterers and high-end restaurants across the Greater Toronto Area.

The company, which got its start in a greenhouse on U of T’s St. George campus, has recently expanded with operations at ��οScarborough and Casa Loma, a museum, event space and historic site in midtown Toronto.

Growing plants without soil, known as hydroponics, is a technique commonly used in greenhouses worldwide. But Sharif and his team see an opportunity to make the industry more sustainable, starting with the soil replacement that the plants grow in.

“The product that almost everyone uses today is basically the same as house insulation,” Sharif says. “It’s made from rocks that are mined in remote places and shipped hundreds of kilometres to a production facility, where they are heated to thousands of degrees in a giant furnace to make a porous, chemically inert material. This material then needs to be shipped again to where it’s needed, and when you’re finished, you throw it in the garbage.”

By contrast, Lyrata’s SmartSoil is 3D-printed using biopolymers such as polylactic acid, which is derived from corn. These materials can be locally sourced and require much lower temperatures to melt and form into porous structures.

When the growing cycle is complete, the product goes through a low-heat proprietary cleaning process and can be used again. Sharif says that SmartSoil has a total lifespan of about two years, after which it can be composted along with crop residue. Together, these changes greatly lower the carbon footprint of indoor farming.

In 2020, Sharif and his co-founders brought his idea to The Entrepreneurship Hatchery, ��οEngineering’s startup incubator and one of several entrepreneurship hubs across U of T’s three campuses. Through the Hatchery’s Nest process, they were connected with business mentors, including alumnus Xavier Tang, a consultant and venture capitalist who still advises the company today.

Over the next few years, the team evolved, with some original members leaving and others joining. They include Leo Hua, who has been pivotal to speeding the development of 3D printable soil. The concept evolved, too, as the team realized that producing food was a better business for Lyrata than rather than selling their growth medium to other farmers.

The Hatchery team – in particular, Executive Director Joseph Orozco, Go-To-Market Lead Erika J. Murray and a team of work-study students, mentors and legal externs – helped Lyrata develop their technology and business. In 2022, the Hatchery provided $155,000 in seed funding, enabling the founders to be employed by their company and further supporting business development. The funding also enabled the company to rent greenhouse space on campus, where they began growing lettuce to provide to Spaces and Experiences at U of T.

Lyrata also developed something new: a modular unit that works exclusively with their SmartSoil and contains everything required to produce a variety of indoor crops – from lights and growth medium to irrigation systems.

“None of these technological and business developments would have taken place without the generous support of the over 50 Hatchery mentors, work-study students, and legal externs who contributed to our success,” says Sharif.

“Our current concept is what we call farming-as-a-service,” Hua adds. “The SmartGrow unit we developed is small enough to fit into a standard parking spot. Our clients sign a contract with us to place a unit on their site and we take care of everything from planting to harvesting.

“For a flat fee, they get a self-contained farm that provides a reliable quantity of their desired crop over a set period of time.”

In addition to providing a locally sourced, sustainable product, Sharif says the approach can also help mitigate fluctuations in the price of wholesale produce.

“In Canada, most of our lettuce comes from California, which has been dealing with drought and many other issues,” says Sharif. “Supply chain disruptions due to COVID-19 were also a big challenge for restaurants, which have very thin margins to begin with. At one point, the price of lettuce increased by a factor of six, so you can imagine the effect that would have.”

So far, Lyrata has produced more than 15 different types of crops, including basil, parsley and mizuna, also known as Japanese mustard greens.

Support from the ��οEngineering community has been key to Lyrata’s success.

For example, it was a ��οEngineering alumni connection that recently led to Lyrata launching an installation at the historic Casa Loma museum and landmark in Toronto.

“Lyrata’s competitive edge is that they provide an on-site, full service and they do not take up very much space,” says Nikol Watlikiewicz, Casa Loma’s horticulture and grounds manager. “In a small corner of our potting shed, we were able to build two grow units that provide a good yield weekly, without having to train our staff on the complicated system.

“Growing indoors gives us the stability and control that traditional agriculture does not. It’s an excellent example of how engineers can help solve the global food crisis with innovative thinking.”

In August, Lyrata launched another growing unit at ��οScarborough, located within the Harmony Commons Dining Hall.

The priority for the next few years is growing Lyrata’s crop offerings and client base with ongoing support from The Hatchery. The incubator has facilitated graduate student placements through Mitacs, with matching funds. It also backed a recent $167,500 project with the Ontario and Canadian governments through the Sustainable Canadian Agricultural Partnership program to further advance the yield and efficiency of the SmartSoil system.

“The fact we’ve been able to come this far in such a short time is in large part due to the help we’ve had from ��οEngineering, and especially the Entrepreneurship Hatchery,” says Sharif.

“Whether it was getting seed funding, finding mentors, hiring work-study students or making important connections through their alumni network, we wouldn’t be here without their support.”

��οEngineering student team wins international prize with sustainable wind turbine

rahul.kalvapalle — Tue, 06 Aug 2024 13:44:46 +0000

��οEngineering student team wins international prize with sustainable wind turbine

rahul.kalvapalle Tue, 08/06/2024 - 09:44

Cutline

From left to right: UTWind team members Robert Zhao, Joeun Yook, Micheal Jing, Dhara Patel, Alexis Terefenko, Justin Ding, Andre Li and Alex Chen (photo by Niels Adema)

Tyler Irving

Topic

Our Community

Faculty of Applied Science & Engineering

Faculty of Arts & Science

Research and Innovation

Sustainability

Undergraduate Students

Subheadline

It’s the UTWind team’s second victory at the International Small Wind Turbine Contest, following their win in 2022

A team of students from the University of Toronto’s Faculty of Applied Science & Engineering have earned top spot in the International Small Wind Turbine Contest with a design that utilized components from recycled pop bottles and plant-fibre composites.

The competition, which is hosted annually at Hanze University of Applied Sciences in Groningen in the Netherlands, challenges student teams to design and build a small-scale wind turbine for deployment in sub-Saharan Africa. Teams are evaluated on the overall energy yield of their turbine, the sustainability of their design, the quality of their construction and the presentation they give to the judges.

The UTWind team's first-place finish saw them outcompete seven other teams from countries including Denmark, Poland, the Netherlands and Spain. This is the second time the team won the contest, following their debut performance in 2022.

Justin Ding, a second-year mechanical engineering student and incoming co-lead of UTWind's mechanical and manufacturing team, says the team made improvements to the pitch system for this year’s design and implemented more sustainable materials.

“For example, we used plant-based flax fibre composites to make the blades, which makes them lighter. The nose cone was made from recycled polyethylene terephthalate, or PET plastic, which is more sustainable than using new material,” Ding says.

“We gathered plastic pop bottles from around campus, including the student-run Hard Hat Café,” says third-year mechanical engineering student Elena Sloan, the other co-lead of the mechanical and manufacturing team. “We then cut these bottles into strips and extruded them through a heated nozzle to make 1.75 mm diameter filament, which we could use in our 3D printer.”

Once the turbine was complete, it was disassembled and packed into four bags of checked luggage for the flight to the Netherlands. The team’s first stop was Delft, where their turbine underwent testing in a wind tunnel at Delft University of Technology’s Open Jet Facility.

The testing showed that the team was able to harvest about 36 per cent of the available energy at a wind speed of 8.5 metres per second, a solid, but not outstanding result.

From there, the team members took a three-hour train ride across the country to Groningen, where they gave their technical presentation, followed by the awards ceremony.

“We didn’t really expect to win best overall, but we thought we had a decent chance at winning for the most sustainable design,” says Dhara Patel, incoming co-president of UTWind and a second-year electrical engineering student.

“When we found out we didn’t win that award, we were pretty devastated, but it was a complete shock to then find out that we won the whole competition – our mouths just hung open for a while.”

View this post on Instagram

A post shared by UTWind (@utwindclub)

Going forward, Patel says the team would like to try building a vertical-axis turbine in addition to their standard horizontal-axis version. “Vertical-axis turbines look really cool, and they are structurally simpler and have a lower profile than horizontal-axis ones,” she says.

“Only one other team has tried that. We’d like to take on that challenge, and ultimately put one on our own campus buildings to generate clean wind power.”

Patel was a high school student when UTWind won their first competition in 2022, and says reading about their success was one of the things that inspired her to study engineering at U of T. The team she eventually came to co-lead now includes more than 50 engineering students as well as some from the Faculty of Arts & Science.

Students are divided into five sub-teams: aerodynamics, mechanical and manufacturing, control systems, power systems and sustainability.

The team members say they’re energized by their win, and have big plans for next year.

“We’ve learned so many lessons – before, during and after the contest,” says Robert Zhao, UTWind's other incoming co-president and an undergraduate student in the department of physics.

“But our competitors have also learned those lessons, and there are more of them than ever before. We need to improve our winning design, making it more robust and more mature to better defend our title.”

More with less: Researchers map a more sustainable path to home construction in Canada

Christopher.Sorensen — Wed, 31 Jul 2024 18:16:30 +0000

More with less: Researchers map a more sustainable path to home construction in Canada

Christopher.Sorensen Wed, 07/31/2024 - 14:16

Cutline

(photo by Roberto Machado Noa/LightRocket via Getty Images)

Tyler Irving

Topic

Breaking Research

Cities

Faculty of Applied Science & Engineering

Graduate Students

Research & Innovation

Sustainability

Subheadline

From more multi-unit projects to fewer basements, a computer simulation shows that multiple building strategies will be necessary to address the country's housing affordability while meeting climate targets

Adopting the right mix of sustainable construction practices could allow Canada to meet its housing goals – as many as 5.8 million new homes by 2030 – without blowing past its climate commitments.

Researchers in the University of Toronto’s Centre for the Sustainable Built Environment (CSBE) developed a computer simulation that forecasts the emissions associated with new housing and infrastructure construction.

The work builds on previous CSBE research that showed that, in order for Canada to meet its greenhouse gas emissions targets, homes built in 2030 will need to produce 83 per cent fewer greenhouse gases during construction than those built in 2018.

“There is an obvious tension between our commitment to reducing our emissions and the need to restore housing affordability,” says Shoshanna Saxe, an associate professor of civil and mineral engineering in the Faculty of Applied Science & Engineering who is the CSBE’s director.

“But that tension only exists because of our status quo approaches to housing. As our research shows, we can build 5.8 million homes and cut GHG emissions from construction – it’s just that we must build them differently than we have in the past.”

In their latest paper, the CSBE team built what they call the future infrastructure growth (FIG) model, which enabled the team to evaluate the effect of implementing various strategies that aim to lower these emissions.

“We built our model using open data from the roughly 50,000 neighbourhoods we currently have in Canada,” says Keagan Rankin, a PhD student who is first author of the new paper published in Environmental Science & Technology.

“We looked at aspects such as how many units there are per neighbourhood, what type of housing stock comprises them, what length of road services them, etc. We then used what we know about current construction methods to model what the embodied emissions would be if you built a given number of new homes in the future, using the same distribution of neighbourhood types.

“Once we had that, we were able to ask the question: how much could we reduce those emissions by adopting sustainable construction strategies, such as denser neighbourhoods or better building design?”

The team looked at five strategies that could be implemented to reduce emissions associated with housing construction:

Urban form: Analysis of existing neighbourhoods showed that emissions per unit are lower for those that contain more multi-unit buildings (either high-rise or low-rise) than they are for those that consist mostly of suburban, single-family homes. This strategy would involve a shift toward more of these multi-unit neighbourhood forms.
Higher infill rate: This refers to placing new housing in existing neighbourhoods – areas that are already built up. Because it reuses existing infrastructure, such as roads and water pipes, this new housing can be built with lower emissions than greenfield developments.
Circularity: This strategy involves re-using existing buildings or infrastructure in the construction of new ones. For example, renovating a single-family home to become a multi-unit dwelling would require fewer materials than razing it and starting from scratch.
Material technology improvements: Innovations in the way that materials such as concrete or steel are manufactured can reduce their carbon footprint. This strategy assumed that by 2030, our main construction materials will be produced with 20 to 25 per cent fewer emissions than today.
Best-in-class design: The team found that some housing designs were associated with lower emissions per unit, such as making the home smaller overall through better layouts. Another example involves the proportion of residential building that is underground. Since basements are typically made of carbon-intensive concrete, the same sized dwelling with a smaller basement would have lower emissions.

Multiple strategies will be required

Using the FIG model, the researchers showed that building housing at the rate required to restore affordability without any changes to construction practices would cause Canada to overshoot its climate commitments by 437 per cent.

However, if the above strategies are implemented, the FIG model suggests that they would in fact be able to reduce emissions to below the target level.

The model also showed that while all five strategies are needed to reach the target, some of them had a stronger effect than others. For example, changing urban forms and using best-in-class design together accounted for roughly two-thirds of the improvements needed. By contrast, the strategies of infill, circularity and improvements in manufacturing each accounted for roughly one-tenth of the changes needed.

The researchers found that for the next one to two decades, the most important elements of sustainable building will be designing better buildings and building denser neighbourhoods.

“The numbers are very close, and of course there’s a certain amount of uncertainty associated with all of these estimates, but it was good to see that we came in below the line, because it means the situation is not completely hopeless,” says Rankin.

“There’s no question that building 5.8 million homes by 2030 is an aggressive target. We may not get there, and if not, it would of course make it a bit easier to stay within our carbon budget.

“But we’ve done ambitious things as a country before, such as building a railroad from coast to coast in just five years. This analysis shows that the strategies we already know about are sound, and that all of them will be needed if we are going to prevent the worst impacts of climate change while also restoring housing affordability.”

New contaminant-tolerant catalyst could help capture carbon directly from smokestacks

rahul.kalvapalle — Wed, 24 Jul 2024 16:45:48 +0000

New contaminant-tolerant catalyst could help capture carbon directly from smokestacks

rahul.kalvapalle Wed, 07/24/2024 - 12:45

Cutline

PhD students Rui Kai (Ray) Miao (left) and Panos Papangelakis (right) hold up a new catalyst that is designed to convert captured CO2 gas into valuable products (photo by Tyler Irving)

Tyler Irving

Topic

Breaking Research

David Sinton

Faculty of Applied Science & Engineering

Mechanical & Industrial Engineering

Research & Innovation

Sustainability

Subheadline

The research marks an important step towards developing economically viable techniques for carbon capture and storage

Researchers at the University of Toronto’s Faculty of Applied Science & Engineering have designed a catalyst that can efficiently convert captured carbon into valuable products – even in the presence of contaminants that degrade the performance of current versions.

The discovery, described in a paper published in Nature Energy, is an important step toward more economically viable techniques for carbon capture and storage that could be added to existing industrial processes.

“Today, we have more and better options for low-carbon electricity generation than ever before,” says David Sinton, professor in the department of mechanical and industrial engineering and senior author on the paper. “But there are other sectors of the economy that will be harder to decarbonize: for example, steel and cement manufacturing. To help those industries, we need to invent cost-effective ways to capture and upgrade the carbon in their waste streams.”

Sinton and his team use devices known as electrolyzers to convert CO2 and electricity into products such as ethylene and ethanol. These carbon-based molecules can be sold as fuels or used as chemical feedstocks for making everyday items such as plastic.

Inside the electrolyzer, the conversion reaction happens when three elements — CO2 gas, electrons and a water-based liquid electrolyte — come together on the surface of a solid catalyst.

The catalyst is often made of copper but may also contain other metals or organic compounds that can further improve the system. Its function is to speed up the reaction and minimize the creation of undesirable byproducts like hydrogen gas, which reduce the efficiency of the overall process.

While several high-performing catalysts have been developed around the world, nearly all of them are designed to operate with a pure CO2 feed. But if the carbon in question comes from smokestacks, the feed is likely to be anything but pure.

“Catalyst designers generally don’t like dealing with impurities, and for good reason,” says Panos Papangelakis, a PhD student in mechanical engineering and a co-lead author on the paper.

“Sulphur oxides such as SO2 poison the catalyst by binding to the surface. This leaves fewer sites for CO2 to react, and it also causes the formation of chemicals you don’t want.

“It happens really fast: whereas some catalysts can last hundreds of hours on a pure feed, if you introduce these impurities, within minutes they can be down to five per cent efficiency.”

Although there are well-established methods to remove impurities from CO2-rich exhaust gases before feeding them into the electrolyzer, these require substantial time, energy and expense. Furthermore, in the case of SO2, even a little bit can be a big problem.

“Even if you bring your exhaust gas down to less than 10 parts per million, or 0.001 per cent of the feed, the catalyst can still be poisoned in under two hours,” says Papangelakis.

In the paper, the team describes how two key changes to a typical copper-based catalyst can make it more resilient to SO2.

On one side, they added a thin layer of polyteterafluoroethylene, also known as Teflon. This non-stick material changes the chemistry at the catalyst surface, impeding the reactions that enable SO2 poisoning to take place.

On the other side, they added a layer of Nafion, an electrically conductive polymer often used in fuel cells. This complex, porous material contains some areas that are hydrophilic, meaning they attract water, as well as other areas that are hydrophobic, meaning they repel water. This structure makes it difficult for SO2 to reach the catalyst surface.

The team then fed this catalyst with a mix of CO2 and SO2, with the latter at a concentration of about 400 parts per million, typical of an industrial waste stream. Even under these tough conditions, the new catalyst performed well.

“In the paper, we report a Faraday efficiency — a measure of how many of the electrons ended up in the desired products — of 50 per cent, which we were able to maintain for 150 hours,” says Papangelakis.

“There are some catalysts out there that might start at a higher efficiency, maybe 75 per cent or 80 per cent. But again, if you expose them to SO2, within minutes or at most a couple of hours, that drops down to almost nothing. We were able to resist that.”

Papangelakis says that because his team’s approach doesn’t affect the composition of the catalyst itself, it should be widely applicable. In other words, teams that have already perfected high-performing catalysts should be able to use similar coatings to confer resistance to sulphur oxide poisoning.

Although sulphur oxides are the most challenging impurity in typical waste streams, they are not the only ones, and it’s the full set of chemical contaminants that the team is turning to next.

“There are lots of other impurities to consider, such as nitrogen oxides, oxygen, etc.,” says Papangelakis.

“But the fact that this approach works so well for sulphur oxides is very promising. Before this work, it was just taken for granted that you’d have to remove the impurities before upgrading CO2.

“What we’ve shown is that there might be a different way to deal with them, which opens up a lot of new possibilities.”

��οstudy highlights tension between Canada’s climate and housing goals

Christopher.Sorensen — Wed, 03 Jul 2024 15:56:06 +0000

��οstudy highlights tension between Canada’s climate and housing goals

Christopher.Sorensen Wed, 07/03/2024 - 11:56

Cutline

A study led by researchers at the Faculty of Applied Science & Engineering shows that Canada will not be able to meet its targets for both new housing and emissions reductions without significant changes to residential construction practices (photo illustration by Adrian So/elxeneize/edb3_6/Envato Elements)

Tyler Irving

Topic

Breaking Research

Faculty of Applied Science & Engineering

Research & Innovation

Subheadline

"Unless things change, by 2030 nearly half of all the allowable emissions in Canada would be due to construction alone"

Canada cannot simultaneously meet its targets for emission reductions and new housing unless there’s a drastic change in construction practices, according to research from the University of Toronto’s Faculty of Applied Science & Engineering.

The new study, published in Environmental Research: Infrastructure and Sustainability, found that if Canada is to stay within its emissions targets, homes built in 2030 will need to produce 83 per cent fewer greenhouse gas emissions during construction compared to homes built in 2018.

“Our analysis shows that in 2018, which is the latest year for which we have the data, the construction sector in Canada was responsible for the equivalent of 90 megatonnes of CO2,” says Shoshanna Saxe, an associate professor in the department of civil and mineral engineering and one of the senior authors of the study. “That was about eight per cent of Canada’s total emissions at the time, but we were not producing nearly as much housing as we needed then, let alone what we need now. To restore housing affordability, we need to triple the rate of housing construction by 2030.”

At the same time, Canada’s greenhouse gas emissions target for 2030 is to be 40 per cent below 2005 levels, which works out to 443 megatonnes, Saxe notes.

“That means that unless things change, by 2030 nearly half of all the allowable emissions in Canada would be due to construction alone.”

Saxe is the director of U of T’s Centre for the Sustainable Built Environment (CSBE), which carries out research on the construction and urban design pathways that will enable Canada to meet its housing and infrastructure needs while curbing greenhouse gas emissions in line with the Paris Agreement, an international climate change treaty enacted in 2015.

The CSBE team’s first step was to quantify the scale of the challenge – but they faced hurdles in gathering data on the construction industry’s carbon footprint.

“What we found was that this data is split across many different parts of the economy: manufacturing, buildings, transportation, etc.,” Saxe says. “There are also questions around consumption versus production: if a piece of steel is made in China and used for a building in Canada, whose emissions are those?

“Until now, it’s been difficult to get a picture of the construction sector as a whole, which is partly why it’s been overlooked.”

Hatzav Yoffe, a post-doctoral fellow and lead author on the paper, used what’s known as an environmentally extended input-output model to conduct a high-resolution, top-down analysis of Canada’s construction sector.

The researchers calculated that residential construction was responsible for the largest share of total construction emissions, at 42 per cent.

Their model also enabled them to ask another question: given the expected increase in housing construction, how much would emissions per constructed home have to decrease by in order to stay within emissions targets?

“You can’t just take the overall 40 per cent reduction target and apply that to the construction sector. That won’t be enough, because you are also tripling the rate of housing construction,” says Saxe.

The other members of the research team included Keagan Rankin, a PhD student in the department of civil and mineral engineering, Daniel Posen, an associate professor in the department of civil and mineral engineering and Christian Bachmann, associate professor at the University of Waterloo.

While the study throws the tension between Canada’s housing targets and its climate targets into sharp relief, Saxe and her colleagues believe it is still possible to reconcile the two – and are researching ways to tackle the challenge.

“For example, if you build more densely, you use fewer materials to build the same number of units. If you are strategic about where you place those units, you don’t have to build as many new roads or sewers to service them,” Saxe says.

“We can also think about changing the balance between housing construction and other types of infrastructure, such as oil and gas infrastructure.

“At the end of the day, if we’re going to build what we need while avoiding the most catastrophic impacts of climate change, we need to seriously think about how we can deliver more with less.”

Academic hospital network joins centre for research on microfluidic devices for human health

Christopher.Sorensen — Wed, 14 Feb 2024 17:05:46 +0000

Academic hospital network joins centre for research on microfluidic devices for human health

Christopher.Sorensen Wed, 02/14/2024 - 12:05

Cutline

Researchers work in the Device Foundry, one of three facilities that are part of the Centre for Research and Applications in Fluidic Technologies (photo by Dahlia Katz)

Tyler Irving

Topic

Our Community

Institutional Strategic Initiatives

Temerty Faculty of Medicine

Unity Health

Faculty of Applied Science & Engineering

Research & Innovation

Subheadline

The Centre for Research and Applications in Fluidic Technologies, or CRAFT, is a partnership between U of T, the National Research Council of Canada and, now, Unity Health Toronto

The Centre for Research and Applications in Fluidic Technologies (CRAFT) has expanded to formally include Unity Health Toronto, an academic hospital network and leading Canadian health research institute.

A partnership between the University of Toronto, the National Research Council of Canada (NRC) and now Unity Health Toronto, CRAFT develops leading-edge microfluidic devices – technologies that take advantage of the fundamental difference in behaviour of many fluids at the micro-scale – that can address many challenges in human health.

The latest agreement, which includes $21 million in new investments and an extension of the partnership to 2028, will support dozens of ��οtrainees who will work alongside NRC scientists and engineers, as well as clinical scientists, on projects related to diagnostics bio-fabrication and organ-on-chip systems.

With the addition of Unity Health Toronto, clinicians will now join CRAFT scientists in developing new microfluidic technologies such as detection and monitoring risks of infection in intensive care unit (ICU) environments and rapid detection of arterial peripheral diseases. This will allow scientists and clinicians to directly test and validate their technologies in care settings, and develop new pathways to work with industry partners.

“CRAFT was built from the common vision that microfluidics could make a real impact on Canada’s scientific and clinical fields,” says Teodor Veres, director of R&D at the NRC’s Medical Devices Research Centre and co-director of CRAFT.

“Focused on providing new student generations with opportunities to forge ground-breaking scientific and technological advancements in microfluidic devices, these advancements have the potential to revolutionize disease diagnosis and treatment in Canada and globally. This vision was crucial to our initiative’s growth and our current success.”

Left to right: Claudia dos Santos, Pamela Plant, Valeria DiGiovanni and Marlene Santos at the CRAFT Translational Research Station inside the Medical Surgical ICU at St. Michael’s Hospital (photo by Unity Health Toronto)

Microfluidics refers to the study of fluids’ unique behaviours at the scale of microns – one thousandth of a millimetre – or smaller, as well as the design and manufacture of devices with tiny channels or other features that can precisely control these fluids. That, in turn, offers new approaches to a variety of challenges in engineering, medicine, biology and chemistry by miniaturizing, automating or innovating on established laboratory techniques.

Applications include rapid diagnostic devices that help clinicians to reliably test for the presence of certain diseases at the patient’s bedside while avoiding the cost and time delays associated with sending samples to large testing laboratories. Microfluidics are also used in biosensors that allow patients in remote communities to send accurate data to specialists located hundreds of kilometres away.

As an example, Claudia dos Santos, Unity Health critical care physician and scientist, has pinpointed a need to quickly identify ICU patients at risk of sepsis. She is working with CRAFT researchers to develop a microfluidic instrument that can detect biomarkers for sepsis on the ICU floor. Such an instrument will allow for faster diagnosis and treatment of sepsis, which can be deadly if left untreated.

“With Unity Health Toronto formally joining CRAFT, we are bringing the power and potential of microfluidic devices into clinical settings. This partnership will allow clinicians to merge their expertise with CRAFT scientists, and take the next major steps towards transforming patient care,” says dos Santos, who is an associate professor in the department of laboratory medicine and pathobiology in the Temerty Faculty of Medicine.

Another application of microfluidics, known as organ-on-a-chip, enables cells, tissues or even portions of working organs to be grown outside the body in microfluidic devices. These biological models can be used in high-throughput screening of large libraries of potentially therapeutic molecules for specific functions – for example, determining which ones would be most effective against a particular type of cancer. Such screens could even suggest the ideal therapies for an individual patient, opening the door to precision medicine.

CRAFT was founded in 2018 and includes three research and development facilities for microfluidic devices: the Tissue Foundry for bioprinting and device preclinical validation; the Device Foundry for microfluidic device design, prototyping and small-scale fabrication; and the NRC Device Fabrication and Scale-Up facility. The first two are located at ��οand available for use by academics, students, industry and government. The latter is located on the NRC campus in Boucherville, Que.

In 2023, the facilities hosted 125 unique users from across ��οas well as partner hospitals, including Sunnybrook, the Hospital for Sick Children and University Health Network. Since its inception, CRAFT has engaged 44 researchers and 114 trainees in a wide range of projects, leading to 69 peer-reviewed publications, 22 patent submissions and three spin-off companies.

“CRAFT has been a team effort all along. In addition to the NRC, we have been supported as an institutional strategic initiative through U of T’s Division of the Vice-President, Research and Innovation, and by U of T’s faculties of Engineering, Arts & Science, Medicine and Pharmacy. We all look forward to an exciting next chapter in partnering with Unity Health,” says Axel Guenther, a professor of mechanical engineering at ��οand co-director of CRAFT.

“Developing the next generation of made-in-Canada microfluidic technologies and bringing them to the people who need them most – patients, health-care professionals and pharmaceutical companies – will require strong partnerships within and outside of CRAFT, with our clinical partners, U of T’s entrepreneurship ecosystem and Canadian industry.

“We invite everyone to visit and use our open research facilities in Toronto, attend our Microfluidics Professional Course on July 17-19, or attend our research symposium in Boucherville on Oct. 12, 2024.”

Add new story tags

Centre for Research and Applications in Fluidic Technologies

��οData Sciences Institute trains workers in data analytics, applied machine learning

Christopher.Sorensen — Tue, 28 Nov 2023 20:44:51 +0000

��οData Sciences Institute trains workers in data analytics, applied machine learning

Christopher.Sorensen Tue, 11/28/2023 - 15:44

Cutline

(Photo: skynesher via Canva, Getty Images)

Tyler Irving

Topic

Our Community

Data Sciences Institute

Institutional Strategic Initiatives

Faculty of Arts & Science

Subheadline

Powered by Upskill Canada, the Data Science and Machine Learning Software Foundations Certificates aim to upgrade workers' skills in fast-growing fields

A new training initiative launched by the University of Toronto’s Data Sciences Institute (DSI), an institutional strategic initiative, is helping Canada meet its growing need for talent in data science and machine learning.

Applications for the DSI Data Science and Machine Learning Software Foundations Certificates opened in October to strong demand. DSI is now gearing up for a second session, scheduled to begin on Jan. 15.

By 2026, digital literacy is projected to be essential for 90 per cent of jobs in Canada

The certificates offer affordable, flexible and rigorous upskilling opportunities, designed for learners with a university degree or college diploma who have three or more years of work experience.

Prospective DSI Certificate participants can be employed or actively seeking employment and do not need experience or education in the field of data science. These certificates are accessible to individuals from all backgrounds, and do not require prior affiliation with the university.

The certificates are powered by Upskill Canada, a national initiative run by Palette Skills and funded by Innovation, Science and Economic Development Canada (ISED). Upskill Canada is designed to meet the talent needs of high-growth sectors while building a more inclusive economy.

Supported by funding from ISED’s Upskilling for Industry Initiative, more than 15,000 Canadian workers will benefit from an innovative approach to skills training. Central to the Upskill Canada initiative is the role of community training providers, who work closely with local and national employers to identify precise suites of skills being sought by industry. Equipping workers with these skills will create new career pathways for Canadians and better position Canadian companies to compete both domestically and internationally.

“What we’re hearing from our partners in industry is that targeted training in key areas can greatly increase the available talent pool in this fast-moving sector,” says Lisa Strug, academic director of the Data Sciences Institute, a senior scientist at the Hospital for Sick Children and professor in the departments of statistical sciences and computer science in the Faculty of Arts & Science, and the division of biostatistics in the Dalla Lana School of Public Health.

“We’re pleased to be able to leverage U of T’s leadership in machine learning and data sciences to provide new opportunities for workers in the digital economy.”

“Through the industry advisory group, prospective employers like Thomson Reuters are actively engaging with the Data Sciences Institute as they develop learning opportunities that address the evolving data science and machine learning demands across small-, medium- and large-sized enterprises,” says Carter Cousineau, vice-president, data and model (AI/ML) governance and ethics at Thomson Reuters.

“This collaborative approach helps ensure learners gain the necessary skillsets to pursue new roles, or identify opportunities for advancement, in this swiftly changing landscape.”

Both certificates offer foundational concepts in data science and machine learning knowledge and provide opportunities for practical application through employer case studies. Each certificate also includes sessions dedicated to career advancement – from support for resume writing to networking and interview skills development.

The technical and job readiness programming will be delivered as online modules with in-person and hybrid opportunities for professional networking. Certificate recipients will be well positioned for roles such as data analysts, data managers or applied machine learning analysts.

The courses and job readiness sessions are offered part-time, allowing learners time to balance existing commitments and still accomplish their career goals. Over the course of the next two years, five cohorts of learners are expected to complete the 16-week certificates. Initially, the training will be offered to learners at a substantially reduced rate of $425 (+HST) per certificate, thanks to the support of Upskill Canada. The DSI has also committed accessibility funding for those with financial need.

“We’re so proud to formally launch Upskill Canada with our inaugural class of workers and training service providers,” says Rhonda Barnet, CEO of Palette Skills, which was chosen by ISED to run the Upskill Canada initiative.

“This is a big first step – but it’s only the beginning. We’re looking forward to working with our supporters in government and industry to upskill many more Canadians so they can transition into high-demand roles in the modern workforce – and help fast-growing companies achieve their full potential.”

��οstudents, learners awarded prestigious Rhodes Scholarships

Christopher.Sorensen — Tue, 28 Nov 2023 15:04:48 +0000

��οstudents, learners awarded prestigious Rhodes Scholarships

Christopher.Sorensen Tue, 11/28/2023 - 10:04

Cutline

From left to right: 2024 Rhodes Scholars Sapolnach Prompiengchai, Leighton Schreyer, Adam Martínez, Tierrai Tull and Anne Xuan-Lan Nguyen (supplied images, photo of Tull by Tysen Harvey Photography Bermuda)

Topic

Temerty Faculty of Medicine

Faculty of Applied Science & Engineering

Faculty of Arts & Science

Subheadline

Four ��οstudents and one medical resident are among the members of the 2024 cohort of Rhodes Scholars

For the first time in more than three quarters of a century, four University of Toronto students have been selected for a prestigious Rhodes Scholarship in a single year.

With interests that span mental health, narrative health, gender and discovering next-gen materials, Sapolnach Prompiengchai, Tierrai Tull, Leighton Schreyer and Adam Martínez are headed to Oxford University with the support of the coveted scholarship, which identifies and supports exceptional young people with the potential to make a positive impact on the world.

Anne Xuan-Lan Nguyen (supplied image)

A fifth member of the ��οcommunity, Anne Xuan-Lan Nguyen, an ophthalmology and vision sciences resident in the Temerty Faculty of Medicine, also received a Rhodes Scholarship via her alma mater, McGill University.

“The University of Toronto is delighted to see so many of our exceptional students and learners join the world-renowned community of Rhodes Scholars,” says ��οPresident Meric Gertler.

“We wish them continued success as they enter the next chapter of their academic journeys. And we look forward to seeing their accomplishments and contributions to society in the years to come.”

Here are the four ��οstudents – two Canadian students, two international students – who recently joined an elite group of more than 100 new Rhodes Scholars from across the globe as part of the 2024 cohort:

Sapolnach Prompiengchai

��οScarborough

(supplied image)

Prompiengchai, who grew up in Thailand and attended school in India, is one of two Rhodes Global Scholars this year – making him the first recipient selected from Thailand through the Global Rhodes program, which is open to candidates from parts of the world that aren’t covered by one of the 25 Rhodes constituencies.

He says the news took a toll on his vocal cords.

“I probably lost my voice from talking to so many incredible people at the University of Oxford and then calling everyone I know,” says Prompiengchai, a fourth-year neuroscience student at ��οScarborough.

A 2020 recipient of U of T’s Lester B. Pearson International Scholarship, Prompiengchai earned recognition for his interdisciplinary mental health research and advocacy. That includes receiving undergraduate research prizes for several of his papers.

A member of the student advisory committee for Inlight, one of U of T’s institutional strategic initiatives, Prompiengchai has worked in five research labs specializing in disciplines including clinical neuroscience, memory and educational psychology.

He is currently working in Professor Andy Lee’s cognitive neuroscience lab at ��οScarborough where he is doing functional magnetic resonance imaging (fMRI) experiments to discover how the brain encodes time when memories are formed.

“I think to properly tackle mental health you need to become a multidisciplinary scientist, so I hope to learn more about genetics and chemistry,” he says.

“I hope to one day be a scientist who can work with diverse stakeholders – including politicians, clinicians, scientists and community groups from diverse backgrounds – in order to translate research into real-world solutions.”

Tierrai Tull

Faculty of Arts & Science

(photo by Tysen Harvey Photography Bermuda)

Tull, a fourth-year student in Woodsworth College studying political science in the Faculty of Arts & Science, says she was on her evening walk overlooking the waters of Bermuda when she got the call.

“I screamed, and I had to mute myself because I didn’t want to blow [the national secretary’s] eardrums out,” says Tull, an international student who is representing the Rhodes constituency of Bermuda. “I was just so overcome with joy that I ran for 15 minutes straight home.”

A recipient of the Dean’s Excellence Award and the Frank Peers Award for International Study, Tull says her studies have focused on gender in the Caribbean, pursuing research ranging from appropriation in the health and wellness industry to the case for reparations under John Locke’s theory of labour.

Her time at ��οhas been a “global experience” spanning five countries, Tull says.

Starting her studies in fall 2020 amid the COVID-19 pandemic, Tull took courses virtually in Armenia during the Nagorno-Karabakh conflict. She continued her remote studies from Bermuda and the U.S. before arriving at ��οin her second year. After studying abroad at University College London, she returned to the St. George campus to finish her degree.

Tull says she’s looking forward to continuing her studies at Oxford, where she’s interested in exploring the social sciences and women’s studies.

A first-generation student on full scholarship, Tull says she hopes her success will inspire students in similar circumstances to shoot for prestigious programs like Rhodes.

“I would encourage anyone who is struggling but has big goals to dare to dream and dare to achieve,” she says. “Don’t tell yourself no before anyone else does.”

Leighton Schreyer

Temerty Faculty of Medicine

Leighton Schreyer (supplied image)

Schreyer, one of two ��οstudents among the 11 Rhodes Scholars selected from Canada, says receiving the call from Rhodes organizers quickly turned into an impromptu celebration.

“I had to turn the stove burner off, so I wasn’t going to burn down my building,” they say. “I think I did a bit of a party dance.”

An activist, writer and poet, Schreyer says their emphasis on the human side of medicine was informed by interactions with the health system – a theme explored in works that have been published in leading medical journals, literary magazines and news outlets. They have also held research positions at Sunnybrook Health Sciences Centre, Unity Health Toronto and the Hospital for Sick Children.

Schreyer plans on fusing passions for storytelling and medicine by pursuing a DPhil in anthropology at Oxford, specializing in medical anthropology. Their interests lie in the field of narrative medicine, which honours the fundamental role that story plays in health care and caregiving – and explores how narrative can help bridge the gap between the biological manifestation of disease and the patient’s lived experience of illness. They credit U of T’s health, arts and humanities program with formally introducing them to the field.

“My story – the narrative of my life – is far from complete and, in many ways, I hope it never will be; I want to be continuously challenged to rethink, rework and refine my story,” Schreyer says. “I hope that, through Rhodes, I will have the opportunity to gain perspective and participate in experiences that will allow me to walk away from Oxford with a bigger, more complete and comprehensive story of the world.”

Adam Martínez

Faculty of Applied Science & Engineering

(supplied image)

Martínez, who was also named a Rhodes Scholar from Canada, says receiving the scholarship was a life-altering event.

“I was walking across campus when I got the call,” he says. “All I really heard were the words ‘Welcome to the Rhodes community,’ and after that it was kind of hard to focus. I could really sense a shift in the trajectory of my future.”

A recipient of U of T’s National Scholarship, Martínez is majoring in engineering physics and has taken on internships and fellowships at leading-edge labs in Ontario and around the world. A key theme of his research is the potential of new materials to solve complex challenges in different domains, from biomedicine to sustainability.

“One example I think about a lot is catalytic materials that can convert captured carbon dioxide into products that we already need, such as methanol and ethanol,” he says. “This could help us close the carbon loop and develop a low-carbon economy.”

However, synthesizing and testing the millions of potential catalytic materials in a lab is too slow, Martinez says, with emerging technologies such as AI and quantum computing holding the potential to dramatically speed up the process.

As a thesis student at the Vector Institute, he is using generative AI models to simulate quantum circuits and bring such systems closer to reality.

He plans to pursue similar research at Oxford, saying the scholarship will help him make new connections and find new problems to solve.

“The Rhodes community includes a lot of different people coming from different areas of the world and different disciplines,” he says. “It’s an opportunity to open dialogues, to think about the implications of my field on theirs, and to use that space to try to do good in the world.”

Prompiengchai, Schreyer, Martínez and Tull were all supported by U of T’s internal selection process for the scholarship.

Tyler Irving

��������οexperts use machine learning to analyze where bike lanes should be located for maximum benefit

Large-scale adoption of electric vehicles can lead to human health benefits: Study

3D-printed soil? ��������οstartup expands sustainable urban farming footprint in Toronto

��������οEngineering student team wins international prize with sustainable wind turbine

More with less: Researchers map a more sustainable path to home construction in Canada

Multiple strategies will be required

New contaminant-tolerant catalyst could help capture carbon directly from smokestacks

��������οstudy highlights tension between Canada’s climate and housing goals

Academic hospital network joins centre for research on microfluidic devices for human health

��������οData Sciences Institute trains workers in data analytics, applied machine learning

��������οstudents, learners awarded prestigious Rhodes Scholarships

Sapolnach Prompiengchai

Tierrai Tull

Leighton Schreyer

Adam Martínez

��οexperts use machine learning to analyze where bike lanes should be located for maximum benefit

3D-printed soil? ��οstartup expands sustainable urban farming footprint in Toronto

��οEngineering student team wins international prize with sustainable wind turbine

��οstudy highlights tension between Canada’s climate and housing goals

��οData Sciences Institute trains workers in data analytics, applied machine learning

��οstudents, learners awarded prestigious Rhodes Scholarships